# Roofing permit PB25-15333 at 600 E Hurst Blvd, Fort Worth

Fort Worth Development Services Department permit PB25-15333: opened Nov 3, 2025 for roofing work at 600 E Hurst Blvd. Section A&B: Third party to modify select MEP items > Remove existing roof > Check roof deck joints to see if sealed or unsealed. If unsealed and greater than 1" in width, cover joints with strip of vapor barrirer membrane > Adhere 1/8" per foot fully tapered insulation to the concrete roof deck (start with A panel at 1.0" thickness) > Adhere 1/4" per foot polyiso crickets where applicable > Adhere DensDeck Prime StormX board to insulation > Adhere Johns Manville 115-mil Fleeceback TPO to coverboard Section C&D: Third party to install interior protection > Remove existing roof > Loose lay 1/2" DEXcell FA roof board on steel deck > Self-adhere JM Vapor Barrier SA to gypsum board > loose lay one (1) layer of 3.5" polyiso insulation > loose lay 1/2" per foot polyiso crickets where applicable > Mechanically gang fasten 5/8" DEXCell FA VSH board through lower layers to steel deck > Adhere Johns Manville 135-mil Fleeceback TPO to coverboard Section E: Third party to install interior protection > third party to modify select MEP items > Remove existing roof > Loose lay 1/2" DEXcell FA roof board on steel deck > Self-adhere JM Vapor Barrier SA to gypsum board > loose lay 1/8" per foot fully tapered insulation on vapor barrier (start with C panel at 2.0" thickness) > Loose lay 1/4" per foot polyiso crickets where applicable > Mechanically gang fasten 5/8" DEXCell FA VSH board through lower layers to steel deck > Adhere Johns Manville 135-mil Fleeceback TPO to coverboard Air Traffic Control Tower: Remove existing roof > Loose lay 1/2" DEXcell FA roof board on steel deck > Self-adhere JM Vapor Barrier SA to gypsum board > loose lay two (2) layers of 2.2" polyiso insulation > Mechanically gang fasten 5/8" DEXCell FA VSH board through lower layers to steel deck > Adhere Johns Manville 135-mil Fleeceback TPO to coverboard.

- Permit number: PB25-15333
- Opened: Nov 3, 2025
- Type of work: Roofing (city: Commercial Building Permit, Remodel)
- Status: Finished (city: Finaled)
- Reported cost: $1,536,247
- ZIP code: 76053
- All permits at this address: https://nearbypermits.com/fort-worth/address/600-e-hurst-blvd/

---
Source: Fort Worth Development Services Department permit data (https://mapit.fortworthtexas.gov/ags/rest/services/CIVIC/Permits/MapServer/0), City of Fort Worth, CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Checked 2026-10-10 22:04 UTC. Nearby Permits, https://nearbypermits.com. JSON API and MCP server: https://nearbypermits.com/developers/

Every permit at 600 E Hurst Blvd: https://nearbypermits.com/fort-worth/address/600-e-hurst-blvd/