Relocate and extend existing conduit and wiring for new utility location
Electrical at 510 E Belvedere Ave, Baltimore
Baltimore Department of Housing and Community Development permit BCCM-26-002877: issued Jul 22, 2026 for electrical work at 510 E Belvedere Ave. Relocate and extend existing conduit and wiring for new utility location. - Install (4) new (Owner furnished) 480V Alpitronic HYC400 electric vehicle chargers. - Furnish and Install - Furnish (2) 3?4 x10 -0 copper rod at utility transformer pad. Furnish (1) 3/0 bare copper ground conductor from rod to transformer ground connection. - Additional ground rods shall be installed using #6 bare copper conductor. - Install (Owner furnished) 2000A, 480Y/277V, 3PH, 4W Switchboard SWBD-EV1 - Furnish Grounding Electrode 5/8 x8 -0 Copper Clad ground rod, and extend #3/0 solid and #4 bare copper grounding electrode conductor to ground bus of Switchboard SWBD-EV1 - Install new (Owner furnished) 2000A, 277/480V free standing CT Rated Meter as specified in drawing E302. - Furnish and install new 3 KVA Step Down Transformer TX-3 . Ground using #8 grounding conductor. - Use PVC40 Conduit for all underground runs, swapping to GRC immediately upon above grade work. - Furnish and install a 15 Run of (7) Sets of 4 PVC-40 with 3#500 AL + 1#3/0 Neutral from Utility Transformer to SWB- EV1 - Furnish and install an 88 Run of (2) Sets of 3 PVC-40 with 3#500 AL + 1#2/0G from SWBD-EV1 to EV#1 - Furnish and install a 122 Run of (2) Sets of 3 PVC-40 with 3#500 AL +1#2/0G from SWBD-EV1 to EV#2 - Furnish and install a 101 Run of (2) Sets of 3 PVC-40 with 3#500 AL +1#2/0G from SWBD-EV1 to EV#3 - Furnish and install a 128 Run of (2) Sets of 3 PVC-40 with 3#500 AL +1#2/0G from SWBD-EV1 to EV#4 - Furnish and Install a 108 Run of 1 PVC40 with 2#10 CU + 1#10G from SWBD to Canopy Junction Box - Furnish and install an 8 Run of 1 PVC-40 with 2#10 CU + 1#12G from SWBD-EV1 to TX-3 - Furnish and Install a 4 Run of 1 PVC-40 with 2#10 CU +1#10G from TX-3 to Site Comms Box. - Furnish and Install a 60 Run of 1 PVC-40 with pullstring from Site Comms Box to ISP Connection. - Temporary Power as per plans as per code.
- Permit number
- BCCM-26-002877
- Issued
- Type of work
- Electrical
- Status
- Issued
- Reported cost
- $87,000
- ZIP code
- 21212 (from the permit's location)
- City's category
- Parking Lot
- City's status
- Not listed
- Source
- Baltimore Department of Housing and Community Development permit data (this record)
Type of work and status are our own standard labels, so permits compare across cities. The city's wording is in the "City's category" and "City's status" rows. We show costs under $100 as not listed, because filers often enter $0 or $1 when the city doesn't require a cost.
All permits at 510 E Belvedere Ave, and what's permitted nearby
Baltimore Department of Housing and Community Development updated its data Oct 8, 2026. We checked it Oct 8, 22:16 UTC. See the city's official records (City of Baltimore, CC BY 3.0).
For agents and scripts: This page as Markdown · JSON