All Structures must be permitted separately Total tear-off & reroof of SFD
Roofing at 2750 7th St, Boulder
Boulder Planning and Development Services permit RFG2025-00680: issued Sep 4, 2025 for roofing work at 2750 7th St. All Structures must be permitted separately Total tear-off & reroof of SFD, 22 squares of single ply membrane on a pitch represented as less than 2/12. All roof materials shall be installed per manufacturer?s specs. Mid-roof inspection is required if 1) pitch is less than 4/12 or 2) for any roof type other than asphalt shingles (regardless of pitch). Pre-roof inspection required for all overlays. All roof covering materials shall be listed as Class A as tested in accordance with UL Standard 790 or ASTM Standard E 108. At inspection, provide to building inspection staff original wrappers of materials used or applied. Provide additional information -- such as manufacturer's cut sheet for other products used - including, but not limited to, items such as flashing, valley material, sealants, fasteners, ventilation devices or features and roof jacks & penetration boots. Attention: Wind speed requirements for Flat Membrane Roof Assemblies To ensure the safety and structural integrity of buildings within the City of Boulder, the following wind speed verifications are needed for all flat roof membrane assemblies: ? 1.? Engineered Design: A comprehensive engineered design for the flat membrane roof assembly must be submitted at the time of permit application. This design should detail all aspects of the assembly, including materials, installation methods, and load calculations, and number and layout of fasteners to achieve wind speed requirements. ? 2.? Alternative Option: Engineer?s Letter: As an alternative to submitting the full engineered design at the time of permit application, a stamped and signed letter from a qualified engineer will be accepted. This letter must be provided at the time of the mid-roof inspection. The letter should certify that the installed roof membrane assembly meets all applicable building codes and safety standards, based on an engineering review of the installation. Mid-roof inspection still needed to verify class A Fire Rated Assembly. If you have any questions or need further clarification, please contact the City of Boulder Planning and Development Services Dept through Inquire Boulder at https://user.govoutreach.com/boulder/faq.php?cmd=shell.?
- Permit number
- RFG2025-00680
- Issued
- Type of work
- Roofing
- Status
- Finished
- Reported cost
- $40,829
- ZIP code
- 80304
- City's category
- Roofing Replacement Permit, Roofing Replacement Permit
- City's status
- Letter of Completion
- Source
- Boulder Planning and Development Services permit data (this record)
Type of work and status are our own standard labels, so permits compare across cities. The city's wording is in the "City's category" and "City's status" rows. We show costs under $100 as not listed, because filers often enter $0 or $1 when the city doesn't require a cost.
All permits at 2750 7th St, and what's permitted nearby
Boulder Planning and Development Services updated its data Oct 6, 2026. We checked it Oct 6, 19:04 UTC. See the city's official records.
For agents and scripts: This page as Markdown · JSON