Voided for inactivity - no inspection within 180 days All Structures must be permitted separately Total
Roofing at 220 Mohawk Dr, Boulder
Boulder Planning and Development Services permit RFG2025-00788: issued Oct 10, 2025 for roofing work at 220 Mohawk Dr. Voided for inactivity - no inspection within 180 days All Structures must be permitted separately Total tear-off & reroof of SFD, 26 squares of dimensional shingles on a pitch represented as 4/12. All roof materials shall be installed per manufacturer?s specs.? Mid-roof inspection is required if 1) pitch is less than 4/12 or 2) for any roof type other than asphalt shingles (regardless of pitch). For roof/attic assemblies requiring 1/150 ventilation, include a calculation detailing the quantity of intake and exhaust vents demonstrating 1/150 venting ratio compliance". This will also be added to our roof inspection process as an inspection item. Pre-roof inspection required for all overlays. At mid-roof inspection, to ensure the safety and structural integrity of flat-roof buildings within the City of Boulder, a stamped and signed letter from a qualified engineer must be provided. The letter should certify that the installed roof membrane assembly meets all applicable building codes and safety standards, including wind speed verifications, based on an engineering review of the installation. ? Class A roof assembly as tested in accordance with ASTM Standard E 108 or UL Standard 790 required. 2024 City of Boulder Energy Conservation Code (COBECC) insulation requirements apply (R-33 for insulation entirely above deck, R-53 for structures with insulation in attic spaces below deck) unless the scope does not expose insulation (either above or below deck). Roofs without sufficient insulation in the cavity or on the deck and where the insulation is exposed during reroofing shall be insulated either above or below the sheathing.? ?At inspection, provide to building inspection staff original wrappers of materials used or applied. Provide additional information -- such as manufacturer's cut sheet for other products used - including, but not limited to, items such as flashing, valley material, sealants, fasteners, ventilation devices or features and roof jacks & penetration boots.?
- Permit number
- RFG2025-00788
- Issued
- Type of work
- Roofing
- Status
- Cancelled
- Reported cost
- $21,600
- ZIP code
- 80303
- City's category
- Roofing Replacement Permit, Roofing Replacement Permit
- City's status
- Void
- Source
- Boulder Planning and Development Services permit data (this record)
Type of work and status are our own standard labels, so permits compare across cities. The city's wording is in the "City's category" and "City's status" rows. We show costs under $100 as not listed, because filers often enter $0 or $1 when the city doesn't require a cost.
All permits at 220 Mohawk Dr, and what's permitted nearby
Boulder Planning and Development Services updated its data Oct 6, 2026. We checked it Oct 6, 20:44 UTC. See the city's official records.
For agents and scripts: This page as Markdown · JSON