TPO install -Inspect substrate for an appropriate nailable surface
Alteration or repair at 2455 N Main St, Fort Worth
Fort Worth Development Services Department permit PB26-11580: opened Aug 13, 2026 for alteration or repair work at 2455 N Main St. TPO install -Inspect substrate for an appropriate nailable surface. - Installation of 2 layers of 2.2'' ISO Mechanically attached with 3" ISO Plates following manufacturer specs. -Install mechanically attached 60 mill TPO on the field with barbed TPO plates 1ft on center. -Install Fully adhered 60 mill TPO going up and over on parapet walls at least 8 inches. -Terminate all walls with 1" termination bar Mechanically attached with 2" corrosion free screws and water cut off. - Install 3in drip edge to match along all perimeters per manufacturer specs and terminate with 6" cover tape and primer. -Install pipe jack flashing with 20x20" target for double protection.
- Permit number
- PB26-11580
- Opened
- Type of work
- Alteration or repair
- Status
- Issued
- Reported cost
- $74,250
- ZIP code
- 76164
- City's category
- Commercial Building Permit, Remodel
- City's status
- Issued
- Source
- Fort Worth Development Services Department permit data (this record)
Type of work and status are our own standard labels, so permits compare across cities. The city's wording is in the "City's category" and "City's status" rows. We show costs under $100 as not listed, because filers often enter $0 or $1 when the city doesn't require a cost.
All permits at 2455 N Main St, and what's permitted nearby
Fort Worth Development Services Department updated its data Oct 8, 2026. We checked it Oct 8, 23:04 UTC. See the city's official records (City of Fort Worth, CC BY 4.0).
For agents and scripts: This page as Markdown · JSON