No Trades Sister the damaged and cut joists with equal sized members that span bearing point to bearing point
Alteration or repair at 1612 Edgemont Rd, Wake County
Wake County Permit and Inspections permit RABS-177292-2026: issued Aug 11, 2026 for alteration or repair work at 1612 Edgemont Rd. No Trades Sister the damaged and cut joists with equal sized members that span bearing point to bearing point and attached per engineer's recommendation. Install 8"x16" CMU block pier and 24"x24"x12" thick concrete footing per engineer's recommendations to support the intersection of the toe-nailed girder end. Replace the damaged span of girder at the front right with new 4 ply 2"x10" members that span between new 8"x16" CMU block piers and 24"x24"x12" thick concrete footings per engineer's recommendations. Cut back joist to allow for the new girder members to be installed and support joist ends with Simpson metal angle connections. Sister the cut joists for the new girder members with (2) equal sized members that span bearing point to bearing point and attached per engineer's recommendation. Replace the damaged sections of ledgers with new 1x4 ledger boards and attached per engineer's recommendations. Attach joist ends at the new ledger sections with Simpson metal angle connections. Replace the damaged area of perimeter band at the front right with new 4 ply 2"x10" treated members per engineer's recommendations. Install new 8"x16" CMU block piers and 24"x24"x12" thick concrete footings to support the new perimeter band members. Install metal shims to support the floor joists that are out of contact with the drop girder per engineer's recommendations. Install a series of 3 ply 2"x8" treated drop girders below the slab at the left side screened porch and support with 8"x16" CMU block piers built on cast in place concrete footings set into suitable bearing soils. Shim piers and girder with treated lumber and/or metal shims to ensure proper load support is provided.
- Permit number
- RABS-177292-2026
- Issued
- Type of work
- Alteration or repair
- Status
- Issued
- Reported cost
- $21,000
- ZIP code
- 27591
- City's category
- Alteration, Residential Accessory Building Structure
- City's status
- Issued
- Source
- Wake County Permit and Inspections permit data (this record)
Type of work and status are our own standard labels, so permits compare across cities. The city's wording is in the "City's category" and "City's status" rows. We show costs under $100 as not listed, because filers often enter $0 or $1 when the city doesn't require a cost.
All permits at 1612 Edgemont Rd, and what's permitted nearby
Wake County Permit and Inspections updated its data Oct 14, 2026. We checked it Oct 14, 20:24 UTC. See the county's official records (Wake County, CC BY 4.0).
For agents and scripts: This page as Markdown · JSON