Loan/Grant - Install 1/4" gypsum board with 3 coat finish glued to existing ceiling surface material and
Electrical at 4009 Pimlico Rd, Baltimore
Baltimore Department of Housing and Community Development permit BRCM-26-017663: issued Sep 16, 2026 for electrical work at 4009 Pimlico Rd. Loan/Grant - Install 1/4" gypsum board with 3 coat finish glued to existing ceiling surface material and screwed no more than 7" on center to ceiling joists. Stagger joints of gypsum board. Floors & Stairs-Replace severely defective subfloor and floor framing with building code approved and sized material. New subfloor material to be as close to thickness of remaining subfloor as possible. Use 3/4" T&G plywood and stagger joints when possible. Nail subfloor to joists 8" on center. Use pressure treated material when material is within 16" of grade. Install new 12-mil or thicker 100% 12" x 12" no wax vinyl floor tiles to underlayment approx. 120 sq ft. Install a new pedestal sink with faucet. Connect water lines, drain lines and vents necessary for sink to work properly. Remove existing bathtub and, if necessary, wall surface material around tub unit. Provide and install per manufacturer's specifications a new fiberglass bathtub and 3-piece tub/shower wall surround. Provide and install a new 2 piece closed coupled, vitreous china, water saving commode with maximum 1.6 gallons per flush. In basement - Prepare wall surfaces and install waterproof paneling that is at least 1/8" thick with all required molding per manufacturer's instructions. Rear kitchen door - Install a new pre-hung flush 1-3/4" solid core wood door unit including jamb, casing, hinges, striker plate, threshold and weatherstripping. Electrician shall inspect electrical distribution to each room within the dwelling for code compliance. Install 10 vinyl, double hung, double glazed, one-over-one, low /e window and jamb complete with screen and all required hardware. In kitchen - Install new 12-mil or thicker 100% 12" x 12" no wax vinyl floor tiles to underlayment approx. 120 sq ft.
- Permit number
- BRCM-26-017663
- Issued
- Type of work
- Electrical
- Status
- Issued
- Reported cost
- $32,250
- ZIP code
- 21215 (from the permit's location)
- City's category
- Dwelling: Rowhouse
- City's status
- Not listed
- Source
- Baltimore Department of Housing and Community Development permit data (this record)
Type of work and status are our own standard labels, so permits compare across cities. The city's wording is in the "City's category" and "City's status" rows. We show costs under $100 as not listed, because filers often enter $0 or $1 when the city doesn't require a cost.
All permits at 4009 Pimlico Rd, and what's permitted nearby
Baltimore Department of Housing and Community Development updated its data Oct 8, 2026. We checked it Oct 8, 05:51 UTC. See the city's official records (City of Baltimore, CC BY 3.0).
For agents and scripts: This page as Markdown · JSON